G65/G66
BMW X5, iX5 and X6 Forum — 2027+
8.8KVIEWS
8REPLIES
1APPRECIATES
2ACTIVE PEOPLE
07-24-2024LAST POST
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
So recently I took off the head to clean the valves because they were so dunked up that the valves weren’t sealing anymore. So I Lapped them and put everything back with new gaskets, head bolts, ect. But after around 600 miles I started to hear a small tapping noise when I’d be light on the pedal and when I step on it it goes away but comes back at around the mid range.
It still pulls like hell and no performance loss what so every

It does do it when I hit the clutch and rev it
It does get fast with rpms 2k-4k
I’ve tried turning off each cylinders coil or injector
I’ve replaced the lifters
It 100% sounds like on top of the engine around 3rd and 4th cylander
But it shows no evidence off wear

Should I replace the rollers next ?
Could it be the injector decoupler?

"]
[/img]
Appreciate0
07-24-2024
07-24-2024
ShocknAwe user avatar
ShocknAwe
1Addict
5,078 REP
9K POSTS
Check your logs and see if you're leaking somewhere.
Appreciate1
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
ShocknAwe wrote
Check your logs and see if you're leaking somewhere.
Why’s that boost could cause that ?
Appreciate0
07-24-2024
07-24-2024
ShocknAwe user avatar
ShocknAwe
1Addict
5,078 REP
9K POSTS
BlazzinBilly wrote
Why’s that boost could cause that ?
If you mangled a decoupler you'll have a vac leak. You'll see bank to bank trim variance.
Appreciate0
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
I ain’t that smart with reading logs but I’ll send you the data log that I just did from 2nd gear how can I send it to you

But what my car has is fbo with inlets Mhd stage 2 + wit a 2.5v2 pr fuel pump

I was thinking about replacing them and the seals
Appreciate0
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
And I know I got a boost leak from my bov the spring gon bad and it leaks at roughly 10 lbs of boost usually I get 18 but how could that cause it to tick like that
Appreciate0
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
Appreciate0
07-24-2024
07-24-2024
ShocknAwe user avatar
ShocknAwe
1Addict
5,078 REP
9K POSTS
Didnt see anything alarming in that brief set. Lots of variability. Could be a vac leak bank 1 but it's basically within limits and dme is compensating.

Boost leak and tapping sound. Are your waste gates rattling?
Appreciate0
07-24-2024
07-24-2024
BlazzinBilly user avatar
BlazzinBilly
New Member
4 REP
17 POSTS
ShocknAwe wrote
Didnt see anything alarming in that brief set. Lots of variability. Could be a vac leak bank 1 but it's basically within limits and dme is compensating.

Boost leak and tapping sound. Are your waste gates rattling?
Indeed they are but making good boost rn I ain’t cause of my nice box that sounds like an air compressor
Appreciate0